US Made Amphenol/WPI Plugs & Sockets. Note that for conventional chassis mounting (with screws and nuts), Type S Sockets require the mounting plates listed here. The 86-3-13 and 86-3-24 covers may be used with Type S sockets and 86CP type plugs for making "umbilical cords". The 6 pin socket & plugs are the ones normally used with older Leslie speakers (like 147 & 122) with tube amplifiers, that attach to Hammond organs. The 11 pin socket & plugs work for later Leslie's and Hammond clones. On sockets and plugs that need a snap ring to mount them to a chassis or mounting plate the snap ring is included. |
|
| AMPHENOL 160-61-F TWO PRONG FEMALE POWER CONNECTOR
New Old Stock, Amphenol, made in Chicago, USA. Picture shows both front and back view of this connector. Limited to stock on hand. |
|
|
| AMPHENOL 160-61-F TWO PRONG MALE POWER CONNECTOR
New Old Stock, Amphenol, made in Chicago, USA. Picture shows both front and back view of this connector. Limited to stock on hand. |
|
|
| Spare clips (snap rings) for mounting 78S and 86CP Amphenol style plugs & sockets. |
|
|
| Snaps over Amphenol Type S (78S) sockets and Type CP (86CP) plugs. |
|
|
| Cover similar to 86-3-13, but has a screw-down
strain relief to attach to the cable. Snaps over Amphenol Type S (78S) sockets and Type CP (86CP) plugs. |
|
|
| This socket mounts in the same hole ( 1 1/8" with 1 1/2" mounting centers) as standard octal sockets.Fits tubes such as 2A3,45,300B,811A,572B, etc. Amphenol type 77-MIP-4. |
|
|
| Amphenol type 78S4. Fits tubes such as 2A3, 45, 300B, 811A, 572B, etc. Requires mounting plate 12-001-03 for chassis
mounting, |
|
|
| Amphenol type 78S5. Fits tubes such as 807 and '27. Requires mounting plate 12-001-03 for chassis mounting, |
|
|
| Amphenol type 78S6. Fits tubes such as 6D6 & 42. Often used on Leslie speakers as power connectors. Requires mounting plate 12-001-03 for chassis mounting. |
|
|
|
|
| SOCKET, SIMILAR TO AMPHENOL 78S8, FITS WITH AMPHENOL 86CP8. HAS A SMALL "c" LOGO. |
|
|
| 77-MIP-8 Octal Amphenol Molded In Plate,new,black plastic with plated brass contacts, mounts in conventional 1 1/8" hole with 1 1/2" mounting centers. Made in USA. |
|
|
| Amphenol Socket 9 lug WITH ATTACHED MOUNTING PLATE |
|
|
| 11 pin socket for relays and also used on
some Leslies. Requires mounting plate 12-001-03 for chassis
mounting, also accepts both types of snap-on covers (86-3-13 & 86-3-24).
Amphenol type 78S11 |
|
|
| 77MIP12 12 pin version of Amphenol Molded In Plate socket. Fits 1 1/8 inch hole with 1 1/2 inch mounting hole centers. New Old Stock. Does NOT fit 12 pin compactron tubes or any other tube, this is a power/speaker/relay socket only, typically used in organs or jukeboxes. |
|
|
| Amphenol 86CP4 4 pin plug. |
|
|
| Amphenol 86CP5 5 pin plug. |
|
|
| Amphenol 86CP6 6 pin plug. Often used on Leslie speakers. |
|
|
| Amphenol 86CP8 8 pin (octal) plug. |
|
|
| Hard to find new old stock Amphenol 86CP9 9 pin plugs. These look exactly like the 8 pin plugs, except for the extra pin. |
|
|
| Amphenol 86CP11 11 pin plug. |
|
|
| 12 Pin Amphenol Plug12 Pin NOS Amphenol Plug |
|
|
|
|
| Amphenol p/n 12-001-03. Fits 78S type sockets and 86CP type sockets. |
|
Triode, USA For Customer Service, Questions, Shipping, Ordering, etc., M-F 9AM-4PM CT 1-800-774-3201 Email us Anytime: questions@triodestore.com TECH SUPPORT is available 4 days per week: 9 AM to 4 PM CT Monday, Tuesday, Thursday & Friday Ph 1-800-774-3201 Or email: tech@triodestore.com |