CHASSIS, FACEPLATES, CABINETS - MADE IN USA - SALE!

Here are all the chassis, faceplates and cabinets we carry for your DIY pleasure.
ALL CHASSIS, FACEPLATES & CABINETS
ARE MADE IN USA!

Chassis

5E3 CHASSIS - PREMIUM SUPER MIRROR FINISH, SCREEN PRINTED, MADE IN USA - IN STOCK NOW5E3 CHASSIS - PREMIUM SUPER MIRROR FINISH, SCREEN PRINTED, MADE IN USA - IN STOCK NOW
5E3 CHASSIS PREMIUM SUPER MIRROR FINISH, SCREEN PRINTED, MADE IN USA.
Fits the Belton sockets we use in our kits perfectly. PREMIUM MIRROR FINISHED Stainless Steel.
14.5" by 2.5" high, by 4" deep.

5E3 CHASSIS - PREMIUM SUPER MIRROR FINISH, SCREEN PRINTED, MADE IN USA - IN STOCK NOW 5e3chassisRegular price: $94.95Sale price: $82.95
G15 / 6G15 REVERB CHASSIS - PREMIUM MIRRORED STAINLESS STEEL, MADE IN USA!G15 / 6G15 REVERB CHASSIS - PREMIUM MIRRORED STAINLESS STEEL, MADE IN USA!
CHASSIS FOR OUR G15, 6G15 KITS - PREMIUM MIRRORED STAINLESS STEEL, MADE IN USA
SUPER SALE FOR LIMITED TIME ONLY
Dimensions: 15 1/2'' L x 4 1/8'' W x 2 5/8'' H
Our beautiful custom premium Mirrored Stainless Steel, Screen Printed. Perfect match for our G15 Version 2 kit.
From left to right: On/Off, Input, Pilot light hole, Dwell, Input, Mix, Tone, Output. (Highly mirrored finish, so cardboard is reflected in the pictures.)

G15 / 6G15 REVERB CHASSIS - PREMIUM MIRRORED STAINLESS STEEL, MADE IN USA! g15chassisRegular price: $94.95Sale price: $79.95
FACEPLATE SET FOR JTM45 - MADE IN USA - IN STOCK NOWFACEPLATE SET FOR JTM45 - MADE IN USA - IN STOCK NOW
FACEPLATE / BACKPLATE SET FOR JTM45
Faceplate and backplate set for JTM45 Chassis. Set includes both front and backplate. MADE IN USA.
IN STOCK NOW.

FACEPLATE SET FOR JTM45 - MADE IN USA - IN STOCK NOW jtm45faceplatesRegular price: $79.90Sale price: $59.90
FacePlate: 
JTM 45 Style Chassis for Tube Amp Kit - MADE IN USAJTM 45 Style Chassis for Tube Amp Kit - MADE IN USA
Matching Steel Chassis for our JTM45 Tube Amp Kit! Punched Steel, Room for KT66 tubes, Made in USA.
Dimensions 17" x 6.5" x 2.5" high, plus 3/4" wing on each end.

jtm45chassis$79.95
JTM50 / JMP50 / Plexi Style Chassis MADE IN THE USA!JTM50 / JMP50 / Plexi Style Chassis MADE IN THE USA!
Punched steel chassis for our JTM50 & JMP50, and 50w 1987 Plexi Kits. Power transformer cut-out will fit 40-18033 & 40-18054 PT's. Output transformer mounting holes will fit 40-18025 & 40-18039. Dimensions 17" x 6.5" x 2.5" high, plus 3/4" wing on each end. MADE IN USA.

chassis50plexi$79.95
FACEPLATE SET for JCM800 2204A 50w - MADE IN USA - IN STOCK NOWFACEPLATE SET for JCM800 2204A 50w - MADE IN USA - IN STOCK NOW
Faceplates Set for JCM800 2204A chassis. Set includes both Front and Back Plates. A Perfect Match for our JCM800 2204A Version 2 Kit!!
Dimensions are are 17" x 2.5"
MADE IN USA
IN STOCK NOW!

2204AfaceplateRegular price: $79.90Sale price: $59.90
FacePlate: 
5F1 CHASSIS - PREMIUM SUPER MIRROR FINISH - MADE IN USA5F1 CHASSIS - PREMIUM SUPER MIRROR FINISH - MADE IN USA
MADE IN USA! PREMIUM SUPER Mirror finished stainless steel, screenprinted chassis. Octal holes are a perfect fit for the Belton sockets used in our kits, also has "double D" strain relief hole for cord.
8 3/4" x 4 1/8" x 2 5/8" . IN STOCK NOW.

5F1 CHASSIS - PREMIUM SUPER MIRROR FINISH - MADE IN USA 5f1chassis$69.95
18W Marshall Style Steel Chassis for DIY TUBE Amp Kit MADE IN USA18W Marshall Style Steel Chassis for DIY TUBE Amp Kit MADE IN USA
18W Marshall Style Steel Chassis, Made in USA. A Perfect Match for our 18W TMB Kit!!
Front and Rear Faceplates Now Available!!
Dimensions: 6.75" deep by 2.5" high by 19.5" long plus 3/4" wing on each end.

18wchassis$79.95
JCM800 2204A 50W Chassis for Version 2 DIY Tube Amp Kit Made in USAJCM800 2204A 50W Chassis for Version 2 DIY Tube Amp Kit Made in USA
Steel Chassis for JCM800 2204A VERSION 2 50w Kit. Fits Plexi Style Head Cabinet. (Does not match our Version 1 kit) Accepts Carling Power & Stand-By Switches instead of the Lighted Rocker Switches. Front and Rear Faceplates Now Available!! A Perfect Match for our JCM800 2204A Version 2 Kit!! MADE IN USA.
6.75" deep by 2.5" high by 17" long plus 3/4" wing on each end.

2204AChassis$79.95
JCM800 2203A 100W Chassis for TUBE AMP KIT DIY - MADE IN USAJCM800 2203A 100W Chassis for TUBE AMP KIT DIY - MADE IN USA
Chassis for JCM800 2203A 100W amplifier. Fits Plexi Style Head Cabinet. Accepts Carling Power & Stand-By Switches instead of the Lighted Rocker Switches. Front and Rear Faceplates Now Available!! Dimensions: 25" long (plus a 3/4" wing on each end) x 6.75 deep x 2.5" high. A Perfect Match for our JCM800 2203A Version 2 Kit!! MADE IN USA.

2203AChassisRegular price: $99.95Sale price: $79.95
TW Express Style Chassis for our Tube Amp Kit - MADE IN USATW Express Style Chassis for our Tube Amp Kit - MADE IN USA
TW Express Style Chassis to match our TW Express Style Tube Amp Kit.
17" long x 8" depth by 2" high.
Ends are curled under, as opposed to our Marshall style chassis that have the "wings" on the ends.
Punched Steel, MADE IN USA.

twchassisRegular price: $89.95Sale price: $79.95
FACEPLATE SET FOR JTM45 - MADE IN USA - IN STOCK NOWFACEPLATE SET FOR JTM45 - MADE IN USA - IN STOCK NOW
FACEPLATE / BACKPLATE SET FOR JTM45
Faceplate and backplate set for JTM45 Chassis. Set includes both front and backplate. MADE IN USA.
IN STOCK NOW.

FACEPLATE SET FOR JTM45 - MADE IN USA - IN STOCK NOW jtm45faceplatesRegular price: $79.90Sale price: $59.90
FacePlate: 
FACEPLATE SET FOR JTM50 / 1987 PLEXI 50 CHASSIS - MADE IN USAFACEPLATE SET FOR JTM50 / 1987 PLEXI 50 CHASSIS - MADE IN USA
FACEPLATE / BACKPLATE SET FOR JTM50 Faceplate and backplate set for JTM50 Chassis / 1987 Plexi 50 Chassis. Set includes both front and backplate. MADE IN USA.
IN STOCK NOW.

FACEPLATE SET FOR JTM50 / 1987 PLEXI 50 CHASSIS - MADE IN USA jtm50faceplatesRegular price: $79.90Sale price: $59.90
FacePlate: 
NEW Upgraded Dynaco Mk3 Stainless Steel Chassis MADE IN USANEW Upgraded Dynaco Mk3 Stainless Steel Chassis MADE IN USA
Stainless Steel, Super Heavy Duty, Punched Chassis for Dynaco Mk3. Same dimensions as original. Has iec power cord cut out, holes for heavy duty binding posts, input jack, and bias point. Also has additional rectifier tube socket cut-out, so you can parallel two together or use a can capacitor in its place. Original or repro Mk3 cages will fit as on original. Nice stainless steel finish. Includes top and bottom. Custom built chassis MADE IN USA.

NEW Upgraded Dynaco Mk3 Stainless Steel Chassis MADE IN USA newmk3chassis$109.95
Dynaco Stereo 70 Upgrade Style Punched Chassis MADE IN USADynaco Stereo 70 Upgrade Style Punched Chassis MADE IN USA
NEW ST-70 type Stainless Steel Punched Chassis. Same dimensions as original. Upgrade chassis has cut-outs in front for modern RCA jacks. These are spaced further apart for modern cables. Cut-outs in Back for Binding Posts instead of the original terminal strips make hooking up speaker wires a breeze. These also provide much better contact for the speaker wires. IEC Power Cord Socket Cut-Out on back. Original or repro st70 cages will fit, as on original. Nice stainless steel finish. Check out our custom made Transformers and Boards to build your amp, or you could rebuild your old ST70 on to this New, Improved Chassis. Comes with top and bottom pieces.
13.25" x 9.5" x 1.75"
MADE IN USA.

Dynaco Stereo 70 Upgrade Style Punched Chassis MADE IN USA st70chassisnewRegular price: $139.95Sale price: $134.95
DIYTube ST-35 Punched Chassis MADE IN USADIYTube ST-35 Punched Chassis MADE IN USA
A NEW ST-35 type Stainless Steel Punched Chassis for the DIYTube ST-35. Chassis has cut-outs in front for modern RCA jacks. These are spaced further apart to fit modern cables and jacks. Cut-outs in Back for Binding Posts instead of the terminal strips. These provide much better contact for the speaker wires. IEC Power Cord Cut-Out. Nice Super Heavy Duty stainless steel finish. Check out our custom made Transformers and Boards to build your amp. The chassis is punched for the diytube board not the original pc13. Comes with top and bottom pieces. 13.25" x 9.5" x 1.75" MADE IN USA.

diytubest35chassisRegular price: $138.95Sale price: $129.95
FACEPLATE SET FOR 18W TMB - MADE IN USAFACEPLATE SET FOR 18W TMB - MADE IN USA
18W TMB "Treble, Mid, Bass" Faceplate for 18W Chassis. Set includes both front and backplate.
MADE IN USA.
IN STOCK NOW!

18wfaceplateRegular price: $79.90Sale price: $59.95
FacePlate: 
FACEPLATE SET for JCM800 2204A 50w - MADE IN USA - IN STOCK NOWFACEPLATE SET for JCM800 2204A 50w - MADE IN USA - IN STOCK NOW
Faceplates Set for JCM800 2204A chassis. Set includes both Front and Back Plates. A Perfect Match for our JCM800 2204A Version 2 Kit!!
Dimensions are are 17" x 2.5"
MADE IN USA
IN STOCK NOW!

2204AfaceplateRegular price: $79.90Sale price: $59.90
FacePlate: 
FACEPLATE SET for JCM800 2203A 100w  - MADE IN USAFACEPLATE SET for JCM800 2203A 100w - MADE IN USA
Faceplates Set for JCM800 2203A 100W chassis. Set includes both Front and Back Plates. A Perfect Match for our JCM800 2203A Version 2 Kit!!
MADE IN USA
IN STOCK NOW!

2203AfaceplateRegular price: $79.90Sale price: $59.90
FacePlate: 
Hammond Chassis #1444-22Hammond Chassis #1444-22
The size is 12 X 8 X 2. It is made out of .051 inch aluminum. Great for those DIY projects. Grab our punch kit and nibbler tool and start fabricating. Hammond Part # 1444-22. There is a bottom available, sold separately.

hamchas22$34.95
HAMMOND CHASSIS BOTTOM FOR 1444-22
HAMMOND CHASSIS BOTTOM FOR 1444-22 Bottom for the Hammond 1444-22 Chassis

hamchasbottom$14.95
Hammond 1590J Die Cast EnclosureHammond 1590J Die Cast Enclosure
Perfect for DIY Guitar Effects Pedal Projects!

Dimensions: 5.71" (145mm) x 3.74" (95mm) x 1.77" (45mm)

hammondcase$17.95
ST70 CHASSIS BOTTOM - MADE IN USA
ST70 Chassis Bottom, MADE IN USA.

st70chassisbottom$59.95
Jensen SpeakersJensen Speakers
Triode is happy to offer Jensen Speakers!

Please be aware that we do not stock these speakers -- we place an order with Jensen each week for the units ordered that week. Your Jensen order could take up to 1-1.5 weeks to complete.

jensenspeakers
MK3 CHASSIS BOTTOM PIECE ONLY - MADE IN USA
MK3 CHASSIS BOTTOM PIECE ONLY, MADE IN USA.

MK3 CHASSIS BOTTOM PIECE ONLY - MADE IN USA mk3chassisbottom$39.95
MARSHALL STYLE HEAD CABINET SMALL / 50W - MADE IN USAMARSHALL STYLE HEAD CABINET SMALL / 50W - MADE IN USA

SPECIAL ORDER: PLEASE ALLOW APPROXIMATELY 4-8 WEEKS.
MADE IN USA
Dimensions:
Chassis Cut-Out: 16 3/8"
Height 9" x Width 26" x Depth 8 1/4"

marcabsmall$259.95
DrillingOptions: 
Marshall Style Large Head Cabinet - MADE IN USAMarshall Style Large Head Cabinet - MADE IN USA

MADE IN USA
Dimensions: (Chassis Cut-Out: 16 1/2", Rear Cut-Out: 24 11/16") - (H) 10 3/4" x (W) 29" x (D) 8 1/4"
Covering: Marshall Black Levant, Medium Gold Piping, Small Gold Piping
Hardware: Gold End Cap Handle, Large Rubber Feet, Gold Metal Mesh
SPECIAL ORDER: PLEASE ALLOW APPROXIMATELY 4-8 WEEKS. MADE IN USA.

Marshall Style Large Head Cabinet - MADE IN USA marlarhdcab$309.95
DrillingOptions: 
Tweed Deluxe 5E3 Combo Cabinet - SPECIAL ORDER
Tweed Deluxe 5E3 Combo Cabinet - SPECIAL ORDER
Please allow 4-8 weeks.
Choose from "Raw Tweed", which is the classic Tweed covering with no coating, or the "Laquered Tweed" which has a caramel colored laquer coating that gives the cabinet protection and also a darker, more vintage look.

Tweed Deluxe 5E3 Combo Cabinet - SPECIAL ORDER 5e3cabinet$269.95
Finish: 
5F1 TWEED CABINET - SPECIAL ORDER - PLEASE ALLOW 4-8 WEEKS
5F1 TWEED CABINET - SPECIAL ORDER - PLEASE ALLOW 4-8 WEEKS Tweed Deluxe 5F1 Combo Cabinet - SPECIAL ORDER
Please allow 4-5 weeks.
Choose from "Raw Tweed", which is the classic Tweed covering with no coating, or the "Laquered Tweed" which has a caramel colored laquer coating that gives the cabinet protection and also a darker, more vintage look.

5f1cabinet$239.95
Finish: 


Triode, USA
Customer Service
M-F 9AM-4PM CT 1-800-774-3201
Email us Anytime: questions@triodestore.com