Click to enlargeClamp Mount Capacitors

All capacitors on this page (except as noted) are 1-3/8 inch (35 mm) diameter. The 32-32, 50-50 and 100-100 uF may be used to replace equivalent values in British and European amplifiers such as Marshall and Hiwatt.These are made by JJ-Electronic in the Slovak Republic or F&T in Germany, very reliable and good for replacing British and other European made equivalent parts. All require 1 3/8 inch clamp for mounting except as where noted.


clammounandt

16 + 16uF 450V F&T Dual Clamp Mount Capacitor16 + 16uF 450V F&T Dual Clamp Mount Capacitor
1616ufcancap$23.95
32 + 32uF 500V JJ Dual Clamp Mount Capacitor32 + 32uF 500V JJ Dual Clamp Mount Capacitor
3232jj$23.95
F&T Electrolytic Capacitor, 32/32 µF @ 500 VDC, F&T

F&T Electrolytic Capacitor, 32/32 µF @ 500 VDC
F&T Electrolytic capacitor, 2" high, 1 3/8" in diameter.

FT3232cancap$23.95
50 + 50uF 500V JJ Dual Clamp Mount Capacitor50 + 50uF 500V JJ Dual Clamp Mount Capacitor
5050clampmount$23.95
F&T 50/50 @500v Electrolytic Clampmount Can Capacitor
F&T 50/50 @500v Electrolytic Clampmount Can Capacitor
Made in Germany. 1-3/8" x 2". Clamp required

F&T 50/50 @500v Electrolytic Clampmount Can Capacitor ft5050can$23.95
100 + 100uF 500V JJ Dual Clamp Mount Capacitor100 + 100uF 500V JJ Dual Clamp Mount Capacitor
100100clampmount$29.95
40-20-20-20uF JJ 500V Clamp Mount Capacitor40-20-20-20uF JJ 500V Clamp Mount Capacitor
1 1/2 inch diameter. Four sections, 1 of 40 uf, 3 of 20 uF, all at 500 volts DC rating.

40-20-20-20-500JJ$36.95
Clamp for 1-3/8 diameter (35 mm) clamp mount capacitors.
clamp-1-38$4.99
Clamp for 40-20-20-20 500V cap
1-1/2 inch clamp for the 40-20-20-20 clamp mount cap.

Clamp-1-12$7.95


Triode, USA
Customer Service
M-F 9AM-4PM CT 1-800-774-3201
Email us Anytime: questions@triodestore.com